Materials - Polycarbonate-ISO (PC-ISO)

PC-ISO (polycarbonate-ISO), an industrial thermoplastic, in its raw state meets the ISO 10993-1 and USP Class VI classification1 and comes in a variety of colors. Because of their strength and medical compatibility, PC-ISO blends are commonly used in food and drug packaging and medical device manufacturing. PC-ISO gives you Real Parts™ that can be functionally utilized from conceptual prototyping through design verification through direct digital manufacturing.

Note: PC-ISO meets both ISO 10993-1 and USP Class VI standards in its raw state. Parts produced from the FDM (Fused Deposition Modeling) process must be re-certified before using in these types of applications. It is the responsibility of the finished device manufacturer to make a determination of the suitability of all the component parts and materials to be used in the finished products.

PC-ISO can be sterilized using either the gamma radiation or ethylene oxide (EtO) method.

Available Colors

Translucent (natural) and White.

Note: On-screen and printer color representations may vary from actual colors

Achievable Accuracy
FDM models are produced within an accuracy of +/- .127 mm (+/- .005 inch) up to 127 mm (5 inches).

Accuracy on models greater than 127 mm (5 inches) is +/- .0015% for both units.

Note: Accuracy is geometry dependent.

Maximum Build Dimensions*

• 406 x 355 x 406 (mm)

• 16 x 14 x 16 (inch)

*Larger parts can be built in pieces and bonded if necessary